1PCS Orthodontic Dental Direct Bonding System No-mix/Mini No-mix Kit 3 Paste& 1 Gel/1 Paste& 1 Gel dental tools

1 PCS Orthodontic Dental Direct Bonding System No-mix/Mini No-mix Kit Adhesive 3 Paste& 1 Gel/1 Paste& 1 Gel dental tools

type:no-mix bongidng

model:1 bottle(10ml)primer;3 syringes(3.5g each)paste;1 syringes(2.5ml)etchant gal,accessories.instructions.

type:mini no-mix bonding

model:1 bottle(3ml)primer;1 syringes(3.5g each)paste;1 syringes(2.5ml)etchant gal,accessories.instructions.

instructions:
1、Preparation of teeth: Clean the enamel surface of the teeth, remove the dirt on the teeth, rinse with water; isolate the teeth, and blow the tooth surface with an oil-free and moisture-free air gun.

2、Acid etching tooth surface: Apply the acid etchant to the tooth surface. After about 50-60 seconds, rinse thoroughly with water and blow dry. Note: The surface of the tooth surface after acid etching is chalk . If there is no chalky appearance, prolong the acid etching time.

3、Primer: use a small brush to brush a thin layer of liquid on the tooth acid etching surface, and use a other small brush to brush a thin layer of liquid on the bracket bonding surface (Keep moist)

4、Apply  take a small amount of paste coated to already Applied liquid agent bracket bonding surface  with a mixed rod to form a thin layer.Immediately after applying the paste, the bracket is bonded to the tooth surface,and the bracket position is placed in 20 seconds, and micro pressure 5-10 seconds to prevent the bracket from sliding. Remove excess liquid and paste after 40-60 seconds. Orthodontic operation can be performed after curing for 5 minutes.